A fetal biophysical profile is a prenatal test used to check on a baby's well-being. The test combines fetal heart rate monitoring (nonstress test) and fetal ultrasound. During a biophysical profile, a baby's heart rate, breathing, movements, muscle tone and amniotic fluid level are evaluated and given a score.
Typically, a biophysical profile is recommended for women at risk of pregnancy loss. The test is usually done after week 32 of pregnancy, but can be done when your pregnancy is far enough along for delivery to be considered — usually after week 24. A low score on a biophysical profile might indicate that you and your baby need further monitoring or special care. In some cases, early or immediate delivery might be recommended.
A biophysical profile is a noninvasive test that doesn't pose any physical risks to you or your baby. However, it's not always clear that a biophysical profile can help promote a baby's health. Find out what a biophysical profile involves and whether this prenatal test might benefit you or your baby.
A biophysical profile is used to evaluate and monitor a baby's health. The goal of a biophysical profile is to prevent pregnancy loss and detect fetal hypoxia — when the baby is deprived of an adequate oxygen supply — early enough so that the baby can be delivered and not sustain permanent damage.
The test is most commonly done when there's an increased risk of pregnancy loss. Your health care provider will determine the necessity and timing of a biophysical profile based on whether your baby could survive if delivered early, the severity of your condition and the risk of pregnancy loss.
Your health care provider might initially recommend a modified biophysical profile — a simplified version of the test that includes a nonstress test and assesses amniotic fluid through ultrasound. Your health care provider will then use the results to determine whether you need a full biophysical profile, which also measures a baby's breathing, movements and muscle tone.
Your health care provider might recommend a biophysical profile if you have:
- A multiple pregnancy with certain complications
- An underlying medical condition, such as diabetes or heart disease
- A pregnancy that has extended two weeks past your due date (postterm pregnancy)
- A history of pregnancy loss or previous pregnancy complications
- A baby who has decreased fetal movements or possible fetal growth problems
- Preterm premature rupture of the membranes — when the fluid-filled membrane that surrounds and cushions the baby during pregnancy (amniotic sac) leaks or breaks before week 37 of pregnancy
- Too much amniotic fluid (polyhydramnios) or low amniotic fluid volume (oligohydramnios)
- Rh (rhesus) sensitization — a potentially serious condition that can occur when your blood group is Rh negative and your baby's blood group is Rh positive
- Worrisome results from other prenatal tests
Your health care provider might also recommend a biophysical profile if you're between 40 and 42 weeks pregnant. The benefits of having the test done during this period, however, aren't clear.
Your health care provider might recommend that you have a biophysical profile once a week, twice a week or, rarely, even more frequently — depending on your health condition — until you give birth.
A biophysical profile is a noninvasive test that poses no physical risks to you or your baby.
While a biophysical profile can offer reassurance about your baby's health, it can also cause anxiety. In addition, a biophysical profile might not detect an existing problem or might suggest that a problem exists when there is none.
Also, keep in mind that while a biophysical profile is often recommended for women who have an increased risk of pregnancy loss, it's not always clear that the test can promote a baby's health.
A biophysical profile typically requires no special preparation. Rarely, the ultrasound might need to be done with a full bladder.
A biophysical profile can be done in your health care provider's office or in a hospital. The test might take anywhere from five minutes up to an hour to complete.
During the test
During the nonstress test, you'll lie on an exam table. You'll likely have your blood pressure taken before the test and at regular intervals during the test.
Your health care provider or a member of your health care team will then place a belt across your abdomen. The belt contains a sensor that measures the fetal heart rate. Typically, the test lasts 20 minutes. However, if your baby is asleep, you might need to wait until he or she awakens to ensure accurate results. In some cases, your health care provider might try to awaken the baby by using sound from a special device.
During the ultrasound exam, you'll also lie on an exam table. Your health care provider or an ultrasound technician will apply a small amount of gel to your abdomen. Then he or she will roll a small device called a transducer over your skin. The transducer will emit pulses of sound waves that will be translated into a pattern of light and dark areas — creating an image of your baby on a monitor.
Your health care provider or the ultrasound technician will then evaluate your baby's breathing movements, body movements, muscle tone and amniotic fluid level. The ultrasound might last five to 30 minutes or so, depending on whether your baby is awake, or there's a wait time until your baby awakens.
After the test
When the biophysical profile is complete, your health care provider will likely discuss the results with you right away.
Each area that's evaluated during a biophysical profile is given a score of 0 or 2 points, depending on whether specific criteria were met. A score can be given as soon as the biophysical activity is observed. For example:
- Fetal heart rate. Results of this portion of the test (nonstress test) are called reactive or nonreactive. If your baby's heartbeat accelerates twice or more within a 20-minute period, the results are considered reactive and 2 points will be given. If not enough accelerations occur within a 40-minute period, the results are considered nonreactive and 0 points will be given. Keep in mind that nonreactive results might occur because your baby was asleep during the test.
- Fetal breathing. If your baby displays at least one episode of rhythmic breathing for 30 seconds or more within 30 minutes, 2 points will be given. If your baby's breathing doesn't meet the criteria, 0 points will be given.
- Fetal movement. If your baby moves his or her body or limbs three times or more within 30 minutes, 2 points will be given. If your baby's movements don't meet the criteria, 0 points will be given.
- Fetal muscle tone. If your baby moves a limb from a bent position to an extended position and quickly back to a bent position, 2 points will be given. If your baby's muscle tone doesn't meet the criteria, 0 points will be given.
- Amniotic fluid level. The ultrasound technician will look for the largest visible pocket of amniotic fluid. To obtain a score of 2 points, the pocket must be a certain size. If your amniotic fluid level doesn't meet the criteria, 0 points will be given.
The individual scores are then added together for a total score. Typically, a score of 8 to 10 is reassuring. If you receive a score of 6, your health care provider will likely repeat the test within 24 hours. Another score of 6 or a lower score might lead your health care provider to recommend further testing or an early or immediate delivery.
In addition, if your health care provider finds that you have a low amount of amniotic fluid, you'll need further testing and might need to deliver your baby early — regardless of your overall score.
Keep in mind that certain factors can affect the results of a biophysical profile, including the use of corticosteroids to speed your baby's lung maturity and the presence of an infection. Smoking or taking certain medications also can affect the baby's heart rate.
Be sure to discuss the results of your biophysical profile with your health care provider to fully understand what they might mean for you and your baby.
Mar. 05, 2015
- Manning FA. The fetal biophysical profile. http://www.uptodate.com/home. Accessed Jan. 29, 2015.
- Signore C, et al. Overview of antepartum fetal surveillance. http://www.uptodate.com/home. Accessed Jan. 29, 2015.
- Frequently asked questions. Pregnancy FAQ098. Special tests for monitoring fetal health. American College of Obstetricians and Gynecologists. http://www.acog.org/Patients/FAQs/Special-Tests-for-Monitoring-Fetal-Health. Accessed Jan. 29, 2015.
- Gabbe SG, et al. Antepartum fetal evaluation. In: Obstetrics: Normal and problem pregnancies. 6th ed. Philadelphia, Pa.: Saunders Elsevier; 2012. http://www.clinicalkey.com. Accessed Jan. 29, 2015.
- Cunningham FG, et al. Fetal assessment. In: Williams Obstetrics. 24th ed. New York, N.Y.: The McGraw-Hill Companies; 2014. http://accessmedicine.com. Accessed Nov. 15, 2011.
- Young BK. Nonstress test and contraction stress test. http://www.uptodate.com/home. Accessed Jan. 29, 2015.
- Taking a close look at ultrasound. U.S. Food and Drug Administration. http://www.fda.gov/downloads/ForConsumers/ConsumerUpdates/UCM095487.pdf. Accessed
- Lalor JG, et al. Biophysical profile for fetal assessment in high risk pregnancies. Cochrane Database of Systematic Reviews. http://onlinelibrary.wiley.com/doi/10.1002/14651858.CD000038.pub2/abstract. Accessed Jan. 29, 2015.
- American College of Obstetricians and Gynecologists (ACOG) Committee on Practice Bulletins — Obstetrics. ACOG Practice Bulletin No. 146: Management of late-term and postterm pregnancies. Obstetrics & Gynecology. 2014;124:390.
- Oyelese Y, et al. The uses and limitations of the fetal biophysical profile. Clinics in Perinatology. 2011;38:47.